Designed and built in Brookfield, Wisconsin My Account 847-380-3009

BV125 Motorized Electric Ball Valve, 1-1/4 Inch, 24VDC

$375.00
SKU: BV125

BV125 1-1/4 in motorized PVC ball valve: rugged 24 VDC actuated, full-port true-union valve rated over 100,000 cycles, with position switches and manual override.

1-1/4 in Motorized Ball Valve

This rugged, motor-actuated PVC ball valve is designed and assembled in the USA for demanding agricultural irrigation control and facility water management.

Tested to well over 100,000 cycles, BV series valves combine high-quality components for reliability your crop can depend on. They run on 24 VDC and have no minimum operating time; see the manual for wiring.

1-1/4 inValve size
100,000+Rated cycles
4 sTravel time
150 psiAt 73 °F
True-union PVC valve, threaded and socket weld
Industrial actuator, made in Italy
Open and closed position switches
Designed and assembled in USA
No minimum on-time
Manual override knob
Position switches
Rated over 100,000 cycles

Quality PVC Valve

The full-port PVC ball valve by Jomar Valve (New Holland, MI) is a true-union type with interchangeable flanges for NPT threaded pipe or solvent-weld sockets.

Industrial Actuator

A high-torque Italian actuator from one of the world's largest actuator makers, with a large motor and heavy steel gearing. The manual override knob works even in a power failure. 4-second travel time, 50% duty cycle.

Available Sizes

BV100 · 1 in

BV100 · 1 in

1 in motorized ball valve, 24 VDC.

View BV100 ›
BV125 · 1-1/4 in

BV125 · 1-1/4 in

1-1/4 in motorized ball valve, 24 VDC.

This page
BV150 · 1-1/2 in

BV150 · 1-1/2 in

1-1/2 in motorized ball valve, 24 VDC.

View BV150 ›

About Ball Valves

Diaphragm Valves

Diaphragm valves such as the WX1 are widely used and generally low-cost. They work well with clean water and low-solids solutions but may need periodic disassembly and cleaning, and are not recommended for fluids with sediment or surface build-up.

Ball Valves

A hole through the ball lines up with the pipe to open the flow. Ball valves are high-reliability and low-maintenance, need no cleaning even in harsh conditions, flow freely with a direct path, and shut off positively in both directions. When reliability is critical, a ball valve is the better choice.

Motorized Actuators

Limit switches stop the motor at fully open or closed. As 3-wire actuators, BV valves have no minimum on-time, unlike auto-return actuators (typically 30 seconds) that may fail to close if not left on long enough: a problem for irrigation shots under 30 seconds.

Approvals and Ratings

Certified and tested ratings.

  • NSF / ANSI B1.20.1.
  • ASTM F1970.
  • Pressure rating: 150 psi at 73 °F.
  • Rated life over 100,000 cycles.

Connect it

BV valves are controlled automatically by these Agrowtek controllers.

GrowControl™ GCX

Part of a complete facility control system on a GCX cultivation controller.

View GCX controllers ›

VX8i Valve Controller

Runs up to eight BV valves with the included power supply.

View VX8i ›

RD8i Dry Contact Relay

Requires an external power supply.

View RD8i ›

Need Help Choosing Valves?

Tell us about your zones and water supply and we will recommend the valves, panels and controller.

Planning a new room or a retrofit?

Plan a project