AXG CO2 Gas Horn-Strobe Alarm
GrowControl™ AXG horn-strobe alarm module with purge switch input and dry-contact output, for CO₂ alarm systems with SXG sensors on GCX controllers.
Horn-Strobe Alarm Module
GrowControl™ AXG modules signal alarm conditions in grow facilities with an audible horn and a visual strobe.
Use them with SXG CO₂ gas sensors as part of a CO₂ alarm system on a GrowControl™ GCX. AXG modules can be located inside or outside the grow space.
Purge on Demand
An optional purge switch connects with two-wire cable to the input terminals on the bottom of the unit. Pressing it runs the GCX exhaust until CO₂ reaches a safe level, and the alarm silences.
Dry-Contact Output
Additional NO/NC dry-contact terminals control external devices or additional horns and strobes.
CO₂ Alarm System
The SXG sensor in the grow room reports CO₂ to the GrowControl™ GCX. On an alarm, the AXG horn-strobe at the door warns people outside the room, and the purge button runs the exhaust until CO₂ is back to a safe level.
Connect it
Use it with a GrowControl™ GCX, or with PLCs and building automation over MODBUS.
GrowControl™ GCX
Part of a complete facility control system on a GCX cultivation controller.
View GCX controllers ›LX2 ModLINK™
Connects the GrowNET™ port to RS-422/485 for MODBUS RTU, for third-party PLCs and building automation.
View LX2 ›Manuals and Data Sheets
Need Help Choosing Sensors?
Tell us about your rooms and we will recommend the sensors, alarms and controller.