LX5 isoLINK™ GrowNET™ Isolator & Extender
LX5 isoLINK™: GrowNET™ network isolator and extender with up to 3 kV isolation, for noisy equipment, long runs and outdoor connections.
GrowNET™ Network Isolator and Extender
isoLINK™ modules connect inline with GrowNET™ cables to isolate devices with high electrical noise from the control system.
They also extend connection distances and can inject power to devices from the module's power supply. A 24 VDC power supply is included. Supports GrowNET™ and MODBUS RTU up to 115 kbps.
Common Uses
Most often the isoLINK™ isolates GrowNET™ lighting control modules when the fixtures interfere with network communication. Install it between the control system's GrowNET™ network and the other device or network.
- Outdoor cable runs and weather stations.
- Extending cable length.
- Running cable through harsh environments.
- Interfacing with noisy electrical equipment.
Noise Isolation
Many low-cost fixtures feed electrical noise back into the system and disrupt its operation. The isoLINK™ stops that noise from reaching the control system.
Range Extension
isoLINK™ modules extend the network beyond 100 ft, or between buildings and outdoor locations.
Connect it
Use it with a GrowControl™ GCX, or with PLCs and building automation over MODBUS.
GrowControl™ GCX
Part of a complete facility control system on a GCX cultivation controller.
View GCX controllers ›Manuals and Data Sheets
Need Help Planning the Network?
Tell us about your devices and network and we will recommend the hubs and link modules.
