AgrowDose™ MPX pH & ORP Dosing Panels
MPXP pH dosing panels: a PHX controller and 1, 2 or 4 ADi pumps on a stainless steel panel with sensor and injection manifolds, ready to dose.
Ready-to-Dose pH and ORP Panels
MPXP dosing panels are autonomous pH set-point controllers: a digital PHX hydroponics controller and ADi intelligent peristaltic pump on a stainless steel back panel with sensor and injection manifolds.
Configure each of 1, 2 or 4 independent pump heads as pH up, pH down or ORP. Ideal for recirculating hydroponics, drain-to-waste systems fed by a stock tank, RO water pre-conditioning, pool and spa water and industrial process tanks.
Holding pH where you set it.
The PHX controller's sensors watch the water continuously; when pH or ORP drifts from its set point, the ADi pump doses until it is back.
Built with FDA compliant tubing, the 50 ml/min pumps inject chemicals quickly into water lines up to 25 psi. Recommended flow through the panel's 1 in manifold: 5 to 30 gpm.
Everything on the color display.
Monitor the sensor readings and configure the dosing from the controller's built-in color display. Built on a decade of proven Agrowtek technology.
- High / low history
- Graphical history
- Alarm set points with buzzer
- Guided sensor calibration
- Manual pump priming
- Backlight shut-off timer
Sensors
Precision probes, made in the USA.
Water Temperature
-20 to 60 °CpH
0 to 14 pHORP or DO
±1000 mV / 0 to 20 mg/lSetup Videos:
Manuals and Data Sheets
Need help choosing a doser?
Tell us about your reservoirs and nutrients and we will match the system to them.
